Account Settings

  • Published on Feb 4, 2025
  • 1 minute(s) read
Prev Next

Click in the navigation bar of your Verdi Dashboard and then Settings in the dropdown.

Import Schedule

Under Import CSV Schedule, name and select a .csv file.

This imported file should have seven columns: fieldName, blockName, valveName, duration, startAt, repeatEveryNDays, repeatOnDaysOfWeek.

fieldName - AOI name; blockName - zone name; valveName - device EUI code; duration - time hh:mm; startAt - irrigation start time (yyyy-mm-dd hh:mm:ss); repeatEveryNDays - day interval as a #; repeatOnDaysOfWeek - days of the week to repeat irrigation (sat, sun, mon, tues, wed, thurs, fri)

Set Up Pumps

Under Set Up Pumps, name and add the pumps on your farms. This allows

Change Sensing Frequency

Under Change Sensing Frequency, select the AOI to which to apply the settings. All sensor frequencies are in minutes; higher than default reading and uplink frequencies will affect battery life.

See INFO for further details on how sensor timings work.

Define SMS Alerts

Under SMS Alert Settings:

Define the times SMS notifications shall be sent.

Enter the phone numbers to be alerted and click to add.

Select which alerts should be sent to all the numbers in the list. Select the alert level.

The following alert levels are available:

No alert - Do not send SMS notifications for these issues.

Report periodically - Wait and try to group notifications together. Will always report issues within 60 minutes during work hours.

Alert normally - Send notifications immediately during work hours and delay off-hours notifications until morning.

Emergency alert - Always notify me immediately, regardless of work hours.

The following alerts are available to be sent:

  • offline device

  • damaged tensiometer

  • poor device connection

  • excessive resets

  • irrigating improperly

  • sensor reading above threshold

  • sensor reading below threshold

  • sensor disconnected/broken

  • failed verification

  • over watering

  • under watering

Over-Water Protection

Under Over-Water Protection Settings, define irrigation related metrics that alert users to likely under / over watering. To prevent off-season alerts, click Enable Over Water Protection - slider must be grey.

Dashboard Settings

Under Local Device Settings, you can change settings to better suit your browser settings: Map Icon Size, Scroll Bar Style, Default Field/AOI, Mobile View, and Irrigation Report. Click Reload to Apply to save changes.

Related articles